EUREKA ERGONOMIC 63" Manual Height Adjustable Desk - Black Home Office & Gaming Computer Table with Mouse Pad, Headset Hook & Cup Holder | Perfect for Work, Study & Gaming Setup

I was looking for a simple desk with a large surface area and this desk fits the bill nicely. I also wanted something a little shorter since its seems like even though I'm slightly above average height most desks usually feel just slightly too tall for me. This desk is adjustable for several different heights. Setting it to 28" feels perfect for me. That being said setting a height is simply a matter of bolting the legs on at different positions so you can't just adjust it on the fly.Its pretty cheap for such a large desk so of course you get what you pay for. There's some cost saving manufacturing techniques that are less than desirable. Like the threaded holes in the legs being simply punched out then the metal that gets bent in is threaded. I dont plan on taking it apart anytime soon so I dont really expect there too be any problems but I wouldn't suggest over tightening any if the bolts during assembly.The box arrived in good condition with no shipping damage. But one of the legs has a decent gouge in it. Leaving me to believe that it was damaged before it was packaged.The full sized mouse pad is a nice touch. And even though it ships rolled up it lays flatter than I expected. I just unrolled it right away and placed a box on the end that was on the inside of the roll and let it sit like that while I assembled the desk. Though there is a small spot in the middle of it that looks bleached. (See picture)I use a single post mounting system to mount 3 monitors. The center wire pass through cutout is in the way so I had to clamp the post off-center. I would have used the through desk option to mount the monitors but the cutout is too large for that without some kind of modifications. So thats something to think about if you mount your monitor this way.The headphone and cup holders stick out of the ends. Which puts the cup holder just out of reach without wheeling over. And won't work at all if you want to put the desk in a corner. If they would have drilled 2 more holes it would have give you the option to have them stick out the ends or out the front. Though this can be easily done yourself.What really gets me though is the desktop itself. Its 3 pieces. And there's a seam right where you'd be using the mouse. The mouse pad doesn't make it noticeable but I don't know if I would have bought it had I known this. Which is the problem. All the pictures showing the desktop itself show a single piece. The pictures that show that it is 3 all have the pad on top and you can only see this on the edge. Now that I know what I'm looking for I can see it but I had no idea of before. That just feels a little bait and switchy to me.Over all though for a large simple desk on the cheap im happy with it.*Update*Now that I've used the desk for a little while I can say that I can absolutely feel the seam with the mouse as I use it. Its not terrible but definitely noticeable. Overall though I am enjoying the desk for its large surface area. Hope this review was helpful.Took about 30 minutes to assemble. I’m 6’1 and with it at its max height, I’ve got a lot of leg room. The cup holder is meh, just threw mine out instead of installing.I reorganized my office for multiple computers with multiple desplays and this was a great solution for the desks.I wanted adjustable height to get the best ergonomics to match our chairs and body heights. I did not need the electric motorized standup-desk adjustability.However, the adjustability holes were about 2 inches apart. That was too far to dial in the perfect height. I does have adjustable leveler feed which give about 1/2 inch adjustment. I was able to drill new adjustment wholes between the exist to get 1 inch adjustability. That worked great, but took some time to layout and drill on 7 desks. If I did not have to burn a whole day assembling and drilling new holes, I would give them a 5.Sturdy table easy to assemble. All the parts fit without having to struggle like some furniture. The fittings are all metal including the screw holes, but they are imbedded in the particle wood so be careful not to over tighten. It’s about 50 pounds because of the metal frame which I’m very pleased with. 2 things I would improve on. First: Would like to see the table a little thicker by about 1/4 inch. Second: improve the 2 wire covers on top of the table. The slide function is a little finicky to close with the spring loaded mechanism and the opening is a bit small when slide open. Price wise it’s not too bad, but think it could have been 15% less compared to other tables with similar characteristics.Is it pretty? No. Does it work if you need a lower than average desk height? Yes.Even a year after the order when I inquired about a replacement armrest they went out of their way to send the part. The chair itself is also great and I have no complaints.the table top comes as two parts and it is joined under the table to make one big piece - you need the mat on top to not have unevenness on the top - not a big issue though.I like the height adjustments that the table has available and can hold a good amount of weight - specially compared to the ikea table it replaced.Good design and easy to assemble. Could have a little better finish with all parts alligning well.Disappointed and I never write negative reviews, but this was a big purchase, and felt that other buyers need to know about my dissatisfaction with Eureka.I ordered this Desk because I needed a workstation as soon as possible. When it came in, I was excited to assemble it because the weight of the package was heavy and seemed sturdy. I finally got to the last part in which I had to assemble the parts that made contact with the floor. One leg was easy to assemble. However, the other leg's screws were all short and did not catch the groove. No matter how many times I tried, the screws were just too short. I switched the other leg and the screws fit fine. I asked my brother to try, he had the same issue. I asked my dad to try, he had the same issue. It would have been a pain to disassemble and return because the table is so heavy and all I needed were 4 screws, and I needed it up and operational by Monday. I had to go to the local Home Depot and buy 1/4 in screws and it fit, but the table is not stable. I bought this desk because of all the good reviews. It would have received 5 stars across the board but the desk wobbles and is unstable. I have to put it up against the wall to keep it steady.If somebody from the company reaches out to me and sends me the bottom 4 screws, I may change my review. For now, I'm disappointed.